Tel：+86 135 7086 9158

  • Chinese Chinese

    • PRODUCT LIST

  • 3D Printer

  • 3D Scanner

  • 3D Printing Materials

  • Three-dimensional Software

  • Auxiliary Equipment
    • Recommended information
    4dhcpmingchen
    Location  Home -> Products  ->  Auxiliary Equipment  ->  SINTERIT  ->  Sandblasting machine
    Sandblasting machine

    • Detail

    Present a perfectly smooth surface

    The sandblasting machine uses dry abrasives to clean and polish the printed parts. Use compressed air and small glass balls (abrasives) to blast sand, which can penetrate all corners of your model and highlight every print detail.

    Device parameters

    • Type:    Manual
    • Processing range: 410 x 310 x 200 mm (16.1 x 12.2 x 7.9 in)
    • Maximum pressure: 0.86 MPa / 125 psi
    • Quick interface path: DN 7.2
    • Max abrasive capacity: 4.5 kg (9.9 lbs)
    • Equipment size: 480 x 370 x 360 mm (18.9 x 14.5 x 14.1 in)
    • Equipment weight: 15 kg (33 lbs)
    • Equipment power: 6 W
    • Device input voltage: 230 V / 50 Hz or 120 V / 60 Hz
    • Abrasive:  glass balls 200 μm
    • Required gas flow rate: 300 L/min
    • Required pressure: 0.6 – 0.86 MPa (87 – 124.7 psi)

    Copyright © Shenzhen Airboat Technology Co., Ltd. All rights reserved 【Backstage management】